AUTOMATIC TORQUE SETTER
ZM-1, ZM-2, ZM-3
phot. ZM-2
ZM1
ZM2
ZM3
The ZM series automatic torque setters ZM are used to create test benches for checking torque wrenches.
They are driven by an electric motor.
Devices in cooperation with the reading-control module DM-2 / S1 can automatically perform the measurement cycle of a torque wrench.
ZM automatically loads wrench, detects and records the maximum torque and returns to its original position.
For testing the pointer wrenches the device can operate in manual mode.
Changeable force transducers allow for convenient and quick adjustment of the device to the required torque range.
The devices are designed to work indoors. Is fixed by screwing to the table.
TECHNICAL DATA
Typ ZM-1 ZM-2 ZM-3
| ZM-1 | ZM-2 | ZM-3 | |
| Range [Nm] | over 1000 | 1 to 20 | 20 to 1000 |
| Accuracy class [% of the measured value] | 1 | 1 | 1 |
| Wrench arm length [mm] | 200 to 1100 | 50 to 300 | 150 to 450 |
| Power and control | with DM-2/S1 | with DM-2/S1 | with DM-2/S1 |
| The output shaft (hole) | 32 x 26 x 6 mm | 20 x 16 x 6 mm | 25 x 21 x 6 mm |
If required we can provide the set of reduction coupling ends.
We provide 24 month limited warranty for the device.